- Ảnh mô phỏng protues.
- Code chương trình.
#include <stdio.h>
#include <stdlib.h>
#define _XTAL_FREQ 20000000
#include <xc.h>
// BEGIN CONFIG
#pragma config FOSC = HS // Oscillator Selection bits (HS oscillator)
#pragma config WDTE = OFF // Watchdog Timer Enable bit (WDT enabled)
#pragma config PWRTE = OFF // Power-up Timer Enable bit (PWRT disabled)
#pragma config BOREN = ON // Brown-out Reset Enable bit (BOR enabled)
#pragma config LVP = OFF // Low-Voltage (Single-Supply) In-Circuit Serial Programming Enable bit (RB3 is digital I/O, HV on MCLR must be used for programming)
#pragma config CPD = OFF // Data EEPROM Memory Code Protection bit (Data EEPROM code protection off)
#pragma config WRT = OFF // Flash Program Memory Write Enable bits (Write protection off; all program memory may be written to by EECON control)
#pragma config CP = OFF // Flash Program Memory Code Protection bit (Code protection off)
#define ds PORTCbits.RC0
#define st PORTCbits.RC1
#define sh PORTCbits.RC2
unsigned char khung_du_lieu[32];
unsigned char socot,sohang,tocdo,maled;
unsigned char g,h,a;
//------------------------------------------------------ du lieu cot luu vao ROM------------------------------------------
const unsigned char codedu_lieu_cot[]={
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0xff,0xff,0x60,0x30,0x18,0x0C,0xFF,0xFF,///////////////N
0x00,0x00,0x00,
0x7E,0xFF,0xC3,0xC3,0xCB,0xCB,0xEF,0x6E,///////////////G
0x00,0x00,0x00,
0x7E,0xFF,0xC3,0xC3,0xC3,0xC3,0xFF,0x7E,//////////////O
0x00,0x00,0x00,
0x7E,0xFF,0xC3,0xC3,0xC3,0xC3,0xEF,0x6E,//////////////C
0x00,0x00,0x00,
0xff,0xff,0x03,0x03,0x03,0x03,0x03,0x03,///////////////L
0x00,0x00,0x00,
0x1f,0x3f,0x6c,0xcc,0xcc,0x6c,0x3f,0x1f,///////////////A
0x00,0x00,0x00,
0xff,0xff,0x60,0x30,0x30,0x60,0xff,0xff,//////////////M
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
void tonghop(void);
void delay_ms(unsigned int ms);
void load(unsigned int u);
void main(void)
{
TRISD = 0X00;
TRISC = 0X00;
PORTD=0xff;
PORTC=0x00;
while(1)
{
tonghop();
}
}
void delay_ms(unsigned int ms)
{
unsigned int i;
unsigned char j;
for(i=0;i<ms;i++)
for(j=0;j<120;j++);
}
void load(unsigned int u)
{
unsigned char i;
for(i=0;i<32;i++)
{
khung_du_lieu[i]=codedu_lieu_cot[u];
u++;
}
}
void tonghop(void)
{
unsigned char i;
for(socot=0;socot<106;socot++) //73+32=105 la so phan tu du_lieu_cot
{
load(socot);
for(tocdo=0;tocdo<10;tocdo++)// delay
{
a=0xfe;
h=0x80;
for(sohang=0;sohang<8;sohang++)
{
st=0;
for(i=0;i<32;i++)
{
sh=0;
g=khung_du_lieu[i];
if((g&h)==h) ds=1;
else ds=0;
sh=1;
}
st=1;
h=h>>1;
PORTD=a;
delay_ms(1);
PORTD=0xff;
a=(a<<1)+1;
}
}
}
}
- Link download project Click here
sao ko tải dc file proteus vậy ad
ReplyDelete